>>Manufacturer direct sales
Trough toilet toilet sensor water saver>Trough type water tank water saver
Use and toilet tank sensor trench type public toilet water saving device trench water saver
Toilet sensor water-saving equipment contact number
Purpose:
Toilet water-saving devices can save more than > water bills and avoid losses caused by large flushing of water tanks in the bathroom. Since the toilet water saver is a non-contact water-saving device, it not only effectively prevents bacterial cross-infection, but also water-saving effect is as high as above. It is currently widely used in public toilets with toilet troughs. Especially due to the current drought in southwest my country and the overflow of water resources, places with concentrated crowds such as schools, railway stations, and bus stations should integrate resources and strengthen environmental awareness of water conservation. The working principle of the toilet water saver:
The toilet water saver is composed of an infrared thermal detector, a microcomputer programmable controller, and a low-voltage DC solenoid valve. Its working principle is to complete its work through infrared human body induction. When someone is detecting When there is an activity in front of the detector, the red light of the detector immediately flashes, indicating that a person has been sensed. At the same time, the detector transmits the induction signal to the microcomputer programmable controller, and the controller controls the solenoid valve to open the water, and the water filling time can be adjusted freely. When someone comes, the water is released, and no one stops the water. It is especially suitable for trench toilets in schools, institutions, shopping malls, factories and other units. It has high water saving efficiency, safety and energy saving. Human body infrared induction recognition can identify objects (clothing) of different colors and materials with zero leakage rate.
>Installation method
Use screws to fix the microcomputer program controller and infrared detector on the wall. The detector can be installed along the wall or on the ceiling. The infrared probe sensing window needs to be aligned with the toilet tank or toilet. steps.
>. Install the solenoid valve on the water inlet pipe. Pay attention to the direction of the water inlet. If there is a filter, connect it to the water inlet pipe, as indicated by the arrow.
> Connect the solenoid valve and infrared detector to the terminals on the microcomputer controller.
>, then connect the >C power supply to the wiring terminal on the microcomputer controller.
>Functional features of toilet water saver
>Automatic induction: fully automatic intelligent control by microcomputer, without direct human contact, which can effectively avoid bacterial cross-infection.
> >Digital adjustment: It only takes a few seconds to adjust program parameters.
> > High reliability: microcomputer control technology, no batteries required, the program will never be lost under any circumstances, the system is designed according to industrial standards
> > Suitable for various harsh environments: whether it is high temperature in summer, Even in severe cold temperatures of more than ten degrees below zero, the product can still work normally.
> Safe to use: Install at a height of 1.3 meters or above to avoid personal contact and avoid human damage.
> >Easy installation: no embedded parts in the wall, installation only takes hours.
> > High return on investment: water saving rate, the entire investment can be recovered within ~ months.
>Water-saving effect table of toilet water-saving device
>
> The water tank is flushed once every minute. The price of water depends on the situation in each region. The following data is for reference only!
> >
<> >Automatic water tank>
(Stool tank)
<> >Water pipes are constantly flowing>
(Urine tank)
<> >Toilet water saver>
(Urine tank)
<> Number of flushes per day
<> Times
<> Hours
<> Times
<> Water volume per flush
<> Liters
<> .L/min
<> Liters< br/> <> Daily water consumption
<> .tons
<> .tons
<> .tons
<> Monthly water consumption
<> tons< br/> <> tons
<> tons
<> Save water bills
<> yuan
<> yuan
<>. . . . . .
<> Service life
<> Months
<> Long term
<> More than years
<> Effect of use
<> Frequent use, easy to break out Fault
<> Waste of water and poor flushing effect.
<> Hygiene, energy saving, and avoid bacterial cross-infection.
>Daily maintenance of toilet water-saving devices
>Toilet water-saving devices control the water control system through solenoid valves. Due to long-term use, there will be impurities in the pipes. Generally > Clean the water inlet filter once a month. If the water volume becomes smaller, disassemble the inside of the solenoid valve, clean it first, and then reinstall it as it is, which can extend the service life of the machine.
>Common Troubleshooting of Toilet Water Saver
> If there is a sensor (indicator light is on) but no water comes out: Check whether the solenoid valve filter system is blocked by impurities, clean it, and disassemble the solenoid valve to clean the internal components. Reinstall it as it is. If the solenoid valve does not work, just put in a new solenoid valve coil.
. No sensor (indicator light does not light up) water often flows or no water comes out: Check whether the circuit is connected properly and whether there is power supply. If everything is normal, replace the infrared detector. > , sensor (indicator light is on) normal water
Trench public toilet water saver